Brother MFC 8480DN User Manual
Page 5
Store Print Log to Network
3
1
Auth. Method (6)
Choose the authentication method required for access to the CIFS server Auto, Kerberos
NTLMv2
1
Kerberos is an authentication protocol which allows devices or individuals to securely prove their identity to network servers using a
single sign-on.
2
NTLMv2 is the default authentication method used by Windows to log into servers.
For Kerberos and NTLMv2 Authentication you must also configure the SNTP protocol (network time
server). See page 7 for information on how to configure the SNTP protocol.
• Auto: If you choose Auto, the machine will initially search for a Kerberos server. If the Kerberos
server is not detected, NTLMv2 will be used for the authentication method.
• Kerberos: Choose Kerberos, to use Kerberos authentication only.
• NTLMv2: Choose NTLMv2, to use NTLMv2 authentication only.
Username (7)
Enter the Username for the authentication up to 96 characters.
Note
If the user name is part of a domain, please input the username in one of the following styles:
user@domain or domain\user.
Password (8)
Enter the password for the authentication up to 32 characters.
Kerberos Server Address (if needed) (9)
Enter the KDC Host Address (for example: ftp.example.com) (up to 64 characters) or the IP address
(for example: 192.168.56.189).
c
In the Connection Status (10), you can confirm the last log status. For more information, see
Understanding Error Messages on page 5.
d
Click Submit to apply your settings.