Brother MFC 8480DN - Manual (Page 10)

Store Print Log to Network
8
1
b
Click Advanced Setting.
„ Status (1)
Displays whether the SNTP server settings are enabled or disabled.
„ SNTP Server Method (2)
Choose AUTO or STATIC.
• AUTO
If you have a DHCP server in your network, the SNTP server will automatically obtain the address
from that server.
• STATIC
Enter the address you want to use.
„ Primary SNTP Server Address (3), Secondary SNTP Server Address (5)
Enter the server address (up to 64 characters).
„ Primary SNTP Server Port (4), Secondary SNTP Server Port (6)
Enter the Port number (1 to 65535).
„ Synchronizing Interval (7)
Enter the interval of hours which you want to synchronize to the server (1 to 168 hours).
„ Synchronization Status (8)
You can confirm the latest synchronization status.
c
Click Submit to apply the settings.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)