Alpine CDA-9857 - Manual (Page 23)

21
-EN
01GB05CDA9857.fm
ALPINE CDA-9857 68-04123Z47-A (EN)
Receiving Weather or Traffic information
from SAT Radio
1
Select the SAT Radio Channel for your local traffic/
weather information.
2
Press and hold / for at least 2 seconds in the
SAT mode.
The received weather or traffic channel is stored.
3
Press and hold BAND for at least 2 seconds.
The stored Weather or Traffic channel will be recalled.
4
Press and hold BAND for at least 2 seconds.
Returns to normal mode.
• Stored channels can also be recalled by pressing and holding BAND
for at least 2 seconds, except when in XM or SIRIUS mode.
• Channel other than Weather or Traffic can also be stored and recalled.
Changing the Display
Text information, such as the channel name, artist name/feature, and
song/program title, is available with each XM or Sirius channel. The
unit can display this text information as explained below.
In XM or SIRIUS mode, press TITLE.
Each time you press this button, the display changes as shown below.
XM mode:
SIRIUS mode:
* 1 When ADF is turned OFF, this information is not displayed (see
“Setting the Auxiliary Data Field Display” on page 21).
Displayed in 1 line when text amount is small.
* 2 When the Scroll setting (page 18) is set to “Auto”, the display cannot
be switched by pressing TITLE. The display contents switch
alternately.
• When the “Scroll Setting” (page 18) is set to “Auto,” the display
scrolls continuously.
When the Scroll Setting is set to “Manual,” the display scrolls only
once after any function is performed (PRESET, BAND, SEARCH, etc.).
Press and hold TITLE for more than 2 seconds to scroll the display
manually.
“Channel No.” and “Calendar/Clock” displays do not scroll.
• Depending on the model, the display may differ from the one shown above.
Setting the Auxiliary Data Field Display
The XM Auxiliary Data Field (ADF) display can be switched on or off.
There is no ADF function for the SIRIUS receiver.
1
Press MENU to select the SETUP mode, then press
MODE.
BBE BASS ENGINE SETUP RETURN (OFF) BBE
2
Press or to select the TUNER mode, then
press MODE.
GENERAL TUNER AUDIO DISPLAY DEMO
3
Select “XM ADF” by pressing or , then
press MODE.
4
Select ON/OFF by turning the Rotary encoder.
When setting to ON, Auxiliary Data Field is displayed by
pressing TITLE. (Refer to the “Changing the Display”
section page 21.)
5
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Category Name
Channel No./Channel Name
Artist Name
Song Name
Auxiliary Data Field
Auxiliary Data Field Calendar/Clock
Channel No./Channel Name
Category Name
Channel No./Channel Name
* 1
(Blank)
(Blank)
Category Name
Channel No./Channel Name
Artist Name
Song Name
Composer Name
Song Name Calendar/Clock
Channel No./Channel Name
(Blank)
(Blank)
Category Name
Channel No./Channel Name
* 2
* 2
01GB00CDA9857.book Page 21 Thursday, December 1, 2005 4:23 PM