Alpine CDA-9857 - Manual (Page 18)

16
-EN
01GB05CDA9857.fm
ALPINE CDA-9857 68-04123Z47-A (EN)
About “Text”
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
“text.”
• Some characters may not be displayed correctly with this device,
depending on the character type.
• The CD changer must also be CD Text compatible for the Text
information to be displayed.
• When the Scroll Setting (page 18) is set to “Manual,” press and hold
TITLE for at least 2 seconds to scroll the Text information only once
(TEXT DISPLAY, FOLDER NAME DISPLAY, FILE NAME DISPLAY
or TAG DISPLAY mode,etc.)
• “NO SUPPORT” is displayed when the desired text information
cannot be displayed on this unit.
• The text or tag information may not be correctly displayed,
depending on the contents.
Displaying Time
Press TITLE repeatedly until the time is displayed.
Each press changes the display.
For details, see “Displaying the Text” (page 15).
• Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from GENERAL Setting, TUNER
Setting, etc., to select your desired setting.
1
Press MENU to select the SETUP mode, then press
MODE.
BBE BASS ENGINE SETUP RETURN (OFF) BBE
2
Press or to select the desired item, then
press MODE.
GENERAL TUNER AUDIO DISPLAY DEMO
(e.g. Select AUDIO)
3
Press or to select the desired SETUP
menu, then press MODE.
(e.g. Select Subwoofer)
GENERAL:
Birthday Set Clock Mode Clock Clock Adjust * 1
Play Mode Beep INT Mute AUX IN
(AUX Name) * 2 Digital AUX Power IC Birthday Set
TUNER:
(CH Select) * 3 (XM ADF) * 3 Station Call (CH Select) * 3
AUDIO:
Subwoofer SUBW. System * 4 Subwoofer
DISPLAY:
Dimmer Scroll Type Text Scroll Font Select
BGV Select Opening MSG Calendar Dimmer
DEMO:
Demo
* 1 Refer to “Setting the Time and Calendar” (page 7).
* 2 Displayed only when AUX is ON.
* 3 When SAT is connected.
For the SAT Radio Setting, refer to “SAT Radio Receiver (Optional)”
(page 19).
* 4 Displayed only when Subwoofer is ON.
4
Turn the Rotary encoder to change the setting.
(e.g. Select Subwoofer ON or Subwoofer OFF.)
5
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
SETUP
A typical SETUP procedure is shown in steps 1 to 5 as
follows. See below for further information about each
SETUP menu.
SOURCE/POWER
BAND Rotary encoder
MODE
MENU
TITLE
01GB00CDA9857.book Page 16 Thursday, December 1, 2005 4:23 PM