Alpine CDA-9857 - Manual (Page 22)

20
-EN
01GB05CDA9857.fm
ALPINE CDA-9857 68-04123Z47-A (EN)
Setting the Tuning Method
You can set the tuning method. You can select the received stations in
channel No. order or in channel name order (alphabetic order).
To customers using the SIRIUS Tuner Box:
For details about functions, refer to the SIRIUS Tuner Box Owner's
Manual.
1
Press MENU to select the SETUP mode, then press
MODE.
BBE BASS ENGINE SETUP RETURN (OFF) BBE
2
Press or to select the TUNER mode, then
press MODE.
GENERAL TUNER AUDIO DISPLAY DEMO
3
Press or to select “CH Select,” then press
MODE.
4
Turn the Rotary encoder to set the tuning method.
5
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
• When the setting is completed, switch the channel DOWN/UP by
pressing the or .
Storing Channel Presets
1
Press BAND to select the desired band you want to
store.
2
After tuning in the desired channel, press and hold,
for at least 2 seconds, any one of the preset
buttons (1 through 6) into which you wish to store
the channel.
The selected station is stored.
3
Repeat the procedure to store up to 5 other channels
onto the same band.
• To use this procedure for other bands, simply select the band desired
and repeat the procedure.
• A total of 18 channels can be stored in the preset memory (6 channels
for each band; XM1, XM2 and XM3 or SIRIUS1, SIRIUS2 and
SIRIUS3).
• If you store a channel in a preset memory which already has a
station, the current channel will be cleared and replaced with the
new one.
Receiving Stored Channels
1
Press BAND to select the desired band.
2
Press the channel preset button that has your
desired satellite channel in memory.
Category/Channel Search Function
You can search for programs by Category or Channel No.
1
Press in the XM or SIRIUS mode.
2
Turn the Rotary encoder to select Category Search
mode or Channel Search mode, then press
.
3
Turn the Rotary encoder to select the desired
Category, then press
.
4
Turn the Rotary encoder to select the desired
Channel Name, then press MODE.
• Search items vary depending on the setting in “Setting the Tuning
Method” (page 20).
When “Channel No.” is selected: Channel Name is searched in
numerical order.
When “Alphabet” is selected: Channel Name is searched in
alphabetical order.
• While in Category Search mode, press FUNC. to return to the
selecting search mode.
• The Search mode is canceled if you press and hold for at least 2 seconds,
or no operation is performed for 10 seconds in Category Search mode.
3
Turn the Rotary encoder to select the desired
Channel Name, then press MODE.
• Search items vary depending on the setting in “Setting the Tuning
Method” (page 20).
When “Channel No.” is selected: Channel Name is searched in
numerical order.
When “Alphabet” is selected: Channel Name is searched in
alphabetical order.
• While in Channel Search mode, press or to select another Category.
• While in Channel Search mode, press FUNC. to return to the
selecting search mode.
• The Search mode is canceled if you press and hold for at Least 2 seconds,
or no operation is performed for 10 seconds in Channel Search mode.
Quick Search Function
You can search for all Channels.
1
Press and hold for at least 2 seconds in XM or
SIRIUS mode to activate Quick Search mode.
2
Turn the Rotary encoder to select the desired
Channel within 10 seconds.
The selected Channel is received.
Channel No.: Set in order of channel No.
Alphabet: Set in alphabetic order.
Category Search mode:
Channel Search mode:
01GB00CDA9857.book Page 20 Thursday, December 1, 2005 4:23 PM