Anchor Industries NAV50-1204 - Manual (Page 15)

14
INSTALLING MID PANEL
INSERT FINGERS OF WHEELED PANEL GUIDE
INTO THE OPEN END OF THE RAFTER AND
WELDMENT. TIGHTEN THE BUTTERFLY NUT.
REVERSE FOR OPPOSITE SIDE OF BAY.
RAFTER
WHEELED
PANEL
GUIDE
NOTE: HIP END FABRIC PANELS
NOT SHOWN SO THAT THE FRAME
WILL BE MORE VISIBLE.
PULL MID PANEL UP AND OVER THROUGH
CHANNELS IN RAFTER EXTRUSIONS.
PURLIN SUPPORTS IN 20’ MID BAYS
IN 20’ MID BAYS, INSTALL A SUPPORT PURLIN
BETWEEN THE EAVE AND THE PURLIN AT THE
MID-RAFTER LOCATION. THIS SUPPORT WILL
BRACE AGAINST INWARD DEFLECTION OF THE
EAVE BAY THAT COULD OTHERWISE RESULT
IN WATER PONDING IN THE 20 FT BAY.
14-T
14-B