You can change the stitch width of each zigzag stitch. Normally, the machine automatically sets
an appropriate zigzag stitch pattern width when the stitch pattern is selected. Follow the steps
below when you want to change the zigzag stitch pattern width.

Note
It is not possible to change the width of some stitches (see page 2-10 for reference ).

Press

to narrow the zigzag stitch pattern width. The

value in the display gets smaller.

Press

to widen the zigzag stitch pattern width. The

value in the display gets bigger.

Note
For an alternate method of changing stitch width using
the speed controller (see page 3-34).

This manual is related to the following products:

ULT2001 2001N 2001C 2002D 2003D