Using the machine settings key -19 – Brother SuperGalaxie 3000 3000C 3000D 3100D User Manual
Page 30
Setting Up
1-19
1
2
3
5
4
1
4
2
3
5
7
6
Using the Machine Settings Key
Press
to change the default machine settings (needle stop position, embroidery speed,
opening display, etc.)
1 Select the needle stop position (the needle
position when the machine is not operating)
to be up or down.
2 Select whether to use the sewing speed con-
troller to determine the zigzag width (see page
3-34).
3 Make adjustments to character or decorative
stitch patterns (see page 4-12).
4 Select from among 8 displays when using the
Embroidery functions (see page 5-43).
5 Change the thread color display on the em-
broidery screen; display the thread number,
color name or each time to embroider (see
page 5-42).
6 Adjust the maximum embroidery speed set-
7 Program version display
Note
Version 1.0, this is the installed software version
for your machine. Check with your local author-
ized Brother dealer or at www.brother.com for
notification of an available updates.
Press
to go to the next screen.
1 Change the brightness of the LCD (see page
2 Turn the buzzer ON or OFF.
3 Turn the lamp ON or OFF.
4 Turn the opening screen display ON or OFF.