Acer Altos G330 Series - Manual (Page 108)

5 System troubleshooting 90
Component troubleshooting
Listed below are specific problems that may arise during the use of
your server and their possible solutions.
Power indicator does not light.
Do the following:
• Make sure the power supply module is properly installed.
• Make sure the power cord is connected correctly.
• Make sure that the wall outlet has power. Test it by plugging
another device.
• Make sure the power indicator on the front panel is lit up green.
• Remove all add-in cards and see if the system boots up.
If reboot is successful, install the cards back in one at a time with a
reboot between each addition to determine if one of them is
causing the problem.
• Make sure that you have correctly installed system compliant
memory modules, and that the system DIMM population
guidelines were observed.
• Make sure that you have installed a system compliant processor.
FDD activity indicator does not light.
Do the following:
• Make sure the FDD data and power cables are properly connected.
• Check that relevant switches and jumpers for the FDD are set
correctly.
• Check that the FDD is properly configured.