Brother MFC-9760 - Manual (Page 3)

( For Windows ® 2000 Professional User )
For Parallel inter
face cable users
Step 4. Connect the MFC to your PC with Parallel Cable.
A. Connect the parallel interface cable to the parallel interface port of the MFC and secure the wire clips.
B. Connect the interface cable to the printer port of the computer and secure it with the two screws. For the location of your
computer’s parallel printer port, see the User’s Guide for your computer.
Step 5.
Turn the MFC power switch ON.
Step 6.
The installation of the Brother driver will automatically start.
Follow the instructions on the screen.
1. In the Connect Cable window,
click Next.
( For Windows ® 95/98/98SE/Me Users )
2. When the above screen
appears, click Finish and
wait
as the PC restarts Windows ®
and continues the installation.
3. Click Yes to have the Control
Centre loaded each time
Windows
® is started.
The Control Centre will appear
as an icon in the task tray.
Please see Note *3.
1. In the Connect Cable window,
click Next. 2. When the above screen
appears, Click Finish and
wait
as the PC restarts Windows ®
and continues the installation.
3. When the Digital Signature
Not Found dialog boxes
appear, click Yes to install the
driver. 4. Click Yes to have the Control
Centre loaded each time
Windows
® is started.
The Control Centre will appear
as an icon in the task tray.
Please see Note *3.
Printer and Scanner drivers have been installed and the
installation is now complete. Printer and Scanner drivers have been installed and the
installation is now complete.
( For Windows ® 2000 Users )
For USB inter
face cable users
Step 4.
Turn the MFC power switch ON.
Step 5.
Connect the Filter Core and Cable Tie to the USB cable,
and then connect the MFC to your PC with the USB cable.
(It will take a few seconds for the installation screen to appear.)
Step 6.
The installation of the Brother driver will automatically start.
Follow the instructions on the screen.
1. In the Add Printer Wizard
window, select BRUSB:
USB Printer Port, and then
click Next.
( For Windows ® 98/98SE/Me Users )
2. Accept the default Printer
name by selecting Yes, and
then click Next.
4. If the test page is printed
correctly, click Yes.
If you click No, follow the
prompts on the screen to
correct the problem.
1. When the Digital Signature Not
Found dialog boxes appear, click
Yes to install the driver. 3. Select Yes (recommended),
and then click Finish. A test
page will be printed so you
can check the print quality.
5. Select Yes to restart your
computer, and then click
Finish.
Printer and Scanner drivers have been installed and the
installation is now complete.
2. Select Finish to restart your
computer.
Printer and Scanner drivers have been installed and the
installation is now complete.
6. Click Yes to have the Control
Centre loaded each time
Windows
® is started.
The Control Centre will
appear as an icon in the task
tray. Please see Note *3.
3. Click Yes to have the Control
Centre loaded each time
Windows
® is started. The Control
Centre will appear as an icon in
the task tray. Please see Note *3.
– 3 –