Brother PT-P700 - Manual (Page 22)

Raster Command Reference
- 18 -
2. Print Data
2.3.4 Maximum and minimum lengths
The maximum and minimum lengths are defined below.
180dpi×180dpi
TZe tape
Type Minimum length Maximum length
Normal
4.4mm
0.18
”
31 dots
1000 mm
39.37
”
7086dots
Heat-Shrink Tube
Type Minimum length Maximum length
Normal
4.4 mm
0.18
”
31 dots
500 mm
19.69
”
3543dots
* The minimum length with the driver (minimum print data length: 2 mm margins × 2 + minimum print
area) is based on the machine specifications (due to the machine cutter position), and the minimum
length of tape that can be fed out is 24.5 mm.
For example, even when the minimum print data of 4.4 mm is created, the print result will be the 24.5
mm of tape shown below, since the minimum length of tape that can be fed out is 24.5 mm.
In other words, the print data will be on 24.5 mm of tape when the print data length is 24.5 mm or less.