G raster graphics transfer, Parameters, Z zero raster graphics – Brother TD-2120N User Manual
Page 37: Description, Ff print command, Control-z print command with feeding, Raster graphics transfer, Zero raster graphics, Print command, Control-z
Raster Command Reference
- 33 -
4. Printing Command Details
g
Raster graphics transfer
ASCII:
g
{s}
{n}
{d1}
...
{dn}
Hexadecimal: 67
{s}
{n}
{d1}
...
{dn}
Parameters
{s} 00h
{n} Number of bytes of raster data (d1 to dh)
However, use the following value if no compression is specified as the compression mode.
TD-2020/2120N：n=56 TD-2130N：n=84
{d1~dn} Raster data.
Z
Zero raster graphics
ASCII:
Z
Hexadecimal: 5A
Description
Fills raster line with 0 data.
FF
Print command
ASCII:
FF
Hexadecimal: 0C
Description
Used as a print command at the end of pages other than the last page when multiple pages are printed.
Control-Z
Print command with feeding
ASCII:
Control-Z
Hexadecimal: 1A
Description
Used as a print command at the end of the last page.