Trio Motion Technology MC405 - Manual (Page 8)

LCD DISPLAY
0
1
2
3
4
5
6
7 8
9
10
11
12
13
14
15
0
1
2
3
4
5
6
7 8
9
10
11
12
13
14
15
ENABLE
Display at start-up
Display with WDOG on
The IP address and subnet mask of the MC405 is shown on the LCD
display for a few seconds after power-up. The factory default IP
address is 192.168.0.250. This can be changed using the ETHERNET
or IP_ADDRESS commands via Motion Perfect.
quick start v2-July 2012
Good quality screened cables should be used for the serial ports. The serial ports and CANbus
port are not galvanically isolated, therefore the 0V return MUST be connected to all peripheral
devices. In addition, bond together the 0V (24V return) terminals of all system components so as
to minimise current fl owing in the serial cables.
Trio Motion Technology Ltd. Trio Motion Technology LLC Trio Shanghai Trio India
Website: www.triomotion.com