Timeguard TPT44 - Manual (Page 9)

8
Manual Temperature Setting
A. Temporary temperature override.
1. Press ’+’ or ’–’. The ’ ’ indicator and the
temperature flash.
2. Press the ’+’ or ’–’ key to set the temperature.
3. Press ’Set’ key once to confirm and the ’ ’
indicator flashes every 3 seconds. It will stay in
this Temporary temperature override mode until the
next change from Comfort to Set-Back or vice versa.
4. To exit the temporary override at any time
press ’Set’ again.
B. Hold function in hours.
1. Press ’+’ or ’–’, the ’ ’ indicator and the
temperature flash.
2. Press ’+’ or ’–’ key to set the temperature.
3. Press ’Prog’ key, ’1H’ indicator displayed.
4. Press ’+’ or ’–’ key to set the number of running
hours from 1 to 24. The ’ ’ indicator flashes
every 3 seconds.
5. To cancel this mode press the ’Set’ button.
5. Press the ‘Set’ button once. You will see
the ‘Ø’ symbol flashing which represents
the Floor Temperature Limiter.
6. Using the ‘+’ or ‘–’ button, advance the
temperature to 30°C (maximum).
7. Press the ‘Set’ button once to return
to Normal Operating Mode.