Timeguard TPT44 - Manual (Page 2)

1
General
The ProgramaSTAT TPT44 combines the elements of
timeswitch and room thermostat in a single compact,
economical and stylish unit. Back up is provided to
retain programme information in the event of a
power failure.
The TPT44 controls the room temperature to a
comfort level when required and to a set-back
temperature at other times. It does this using
an internal temperature sensor. The set-back
temperature can be set to 10°C for frost protection
or much higher when elderly or infirm are occupying
the room. The floor temperature is monitored with
an underfloor probe (included) and is limited at
a user adjustable temperature which must not
be set higher than 30°C.
Siting
The TPT44 ProgramaSTAT should not be installed in
a wet area. Further siting instructions are given in
the Thermolay cable and mat instruction leaflet.
If there is additional heating in the room do not
position the TPT44 directly above it.