Timeguard 200.0.000 - Manual (Page 9)

4
Depending on the installation location, natural light intensity, furniture, re-
flection characteristics of the room and the furniture it may be necessary to
correct the settings by 1-2 steps on the scale. For ease of setting up, we
recommend the service remote control QuickSet plus.
 Switch-off time delay
Transfer zones approx. 5min.
Working areas approx. 10min.
In the range between 2 - 15min the switch-off delay time varies accor-
ding to its self-learning behavior. The set values <2min or >15min
remain fixed.
«Pulse»: staircase lighting timer control (0.5sec. “on” / 10sec. “off”)
●
●
●
●


PresenceLight 180

The detector always restarts on setting to test operation
using the “min” potentiometer, with every adjustment of
the «Lux» potentiometer during test operation as well as
after completing test operation.
GB