Timeguard DSS - Manual (Page 11)

10 11
DS2 – Instructions for Installation
and Use
If you have a DS1 working alone or with one or more
DSS’s please refer to separate instructions on page 1.
Tough flame
retardant
polycarbonate
plate fits a
standard
single gang
wall box
16mm deep. Illuminated
push button.
Optional
push-in
screw covers
supplied
1. General.
The DS2 is a time delay switch with an illuminated push button,
which fits on a standard single gang wall box 16mm deep. It requires
a neutral connection and provides delay times between 10 seconds
and 2 hours adjustable by internal potentiometer and range switches.
It can be used to control lamps and other appliances within the limits
set out in the specifications section.
Several DS2’s can be wired in parallel to control a single load but the
DS2 cannot be used in conjunction with DSS’s.
Fig 1 – Front of DS2