Timeguard ZV700 - Manual (Page 6)

5 6
5. Operation in AUTO & PHOTOCELL Mode
Move the slide switch to the AUTO & PHOTOCELL position and turn the rocker switch ON. In
this mode the unit will turn ON at dusk and OFF at a time programmed by the user. To do this it
needs an ON time prior to dusk to be programmed by the user along with the above OFF time
(see Programming Instructions). A safe ON time to cover the whole year anywhere in the U.K. is
1400 hours. A additional ON period can be programmed for the early morning if required. This
will only operate if the ON time occurs in darkness and will last until the programmed OFF time.
In this mode the rocker switch can be used manually to turn the lamp OFF once a programmed
ON period has started, but not to turn it ON during a programmed OFF period.
Override button (also
used in conjunction with
programme button to
set the clock and ON/
OFF times/days)
Day
marker
24 hour
display
Guarded tamper resistant
programme button used to
select the clock time and the 6
“ON/OFF” times/days and to
review them once set
6 Battery
This product has a factory fitted rechargeable battery. If the unit is left with its mains power
switched off for more than 1 month the display may go blank. In this case switch mains on,
wait four hours, and apply reset – see 9 before programming.
7. Programming Overview
This is a seven day (weekly) timeswitch which has six programmes, each of which can be block
programmed to work on all of the five weekdays, both weekend days, or all 7 days (24 hour
operation). Programmes can also be designated to operate on individual days.
ZV700 – Programming Instructions