Timeguard TRT05 - Manual (Page 7)

6
Use ‘Temp’ and ‘Mode’ to adjust the set
temperature required in 1 degree steps.
Press and hold ‘Temp’ button to exit temperature
adjustment.
Programming across midnight:
To programme across midnight, enter the start time
of the last period (say 20:00), and then leave the
end time blank (--:--).
Start the next days on period at 00:00 and then
enter the off time that is required.
Notes on temperature entry:
The default temperature is 20°C.
Temperature set range is 0 to 35°C
Setting temperature:
Press and hold the ‘Temp’ button for 3 seconds.