Programming the on/off times – Timeguard TRT05 User Manual
Page 5
4
3. Programming the
ON/OFF times:
Press ‘Prog’ and hold for 5 seconds.
Display will show prog 1 on, and the hour cursor
will be blinking.
Notes about Time entry:
There is no ‘time out’ if a button is not pushed for
any reason during programming the time.
During programming, when the ‘Temp’ or ‘Mode’
buttons are held down, the adjusted setting will
scroll more rapidly.
Holding down the ‘Time’ button for 3 seconds will
exit the programming time mode. This can be done
at any time during programming.