Timeguard NTT04 - Manual (Page 7)

6
8. Programming
ON/OFF times:
The nTT03/04 has 4 independent on/off periods
available for programming each day. There is a choice
of programming options, including 7 days the same
(24 hours), 5 + 2 days (where the weekdays are the
same, and the two weekend days are the same),
and 7 individual days.
Press and hold the Prg button for
3 seconds. Whilst holding, the word
Hold should show on the display.
After 3 seconds, the mode screen
will show.
Use Adv/ovr or Boost to change the day grouping
mode. This will step through the following options:
24hr – Mo Tu We Th fr Sa Su
5 day – Mo Tu We Th fr followed automatically in
programming by 2 day – Sa Su.
Individual day – Mo followed automatically in
programming by each of the other days.
once the desired day grouping is
selected, press Prg to move onto
programming on/off times.
The display will show Prog 1, with
dashes for the hours and minutes.
Example shown is for 5 + 2 programme.
Use Adv/ovr or Boost to set the hour for the first on
period. Press Prg to change to setting the minutes.
Use Adv/ovr or Boost to set the minutes.