Timeguard NTT04 - Manual (Page 6)

5
Use the Adv/ovr or boost button to
adjust the hour to the correct hour.
Press Time to set the hour, and
then the time will show the minutes.
The hour is a 24 hour clock.
Use the Adv/ovr or boost button
to adjust the minutes to the
correct minutes.
Press Time to exit the Time/date
entry mode.
The display should now show the correct
time/day of the week.
Note: during time/date setting, when the Adv/ovr
or Boost buttons are held down, the setting under
adjustment will advance or decrease more rapidly.
7. Modifying the date and
time of day:
normally the only change required
will be to the time of day minutes, in
which case press and hold Time for
3 seconds, during which hold will
show on the display. After 3 seconds
the display will show the year:
Press Time repeatedly until the minutes are shown.
Use Adv/ovr or Boost to change the minutes to the
correct value. Press Time to return to operating mode.
other changes can be made the same way, but the
Time button must be pressed to return to operating
mode after any changes. There is no automatic exit
from Time/date entry mode.