Sterlco SMS Series Single Shaft Shredder - Manual (Page 13)

GRN4-605 Chapter 1: Safety 13 of 93
Remaining Risks
The machine is constructed so that you are able to operate it safely. Structurally non-
avoidable dangers are prevented as well as possible by the protective devices. Certain risks
still remain. It is imperative to be aware of these risks in order to avoid accidents. To avoid
danger, please observe all safety advice provided.
Type of Danger Activity Possible
Consequences Preventative Measures
Danger of crushing by
heavy parts falling
down/over Unloading and
transporting the
machine and/or
components Serious injury
• Wear personal protective gear
• Follow safety instructions in
manual
Cutting caused by
sharp cutters—even
when rotor is
stationary Cutter replacement,
cutter setting, cutter
sharpening and other
maintenance work Serious injury
particularly to hands
and fingers • Wear personal protective gear
• Follow safety instructions in
manual
Crushing when
opening/closing
maintenance doors on
front side of machine Maintenance work Serious injury
• Make sure no persons are in the
danger area while closing the door
Tripping over cables
and other objects All activities Serious injury
• Lay cables in accordance with
regulations.
• Keep work station clean and tidy.
Crushing, cutting,
amputation caused by
run down of the rotor Maintenance work Serious injury or death
• Maintenance doors must always
be tightly locked during operation.
• DO NOT make the run down
safety devices ineffective by using
technical aids or other
manipulations.
• NEVER use hands to check if the
rotor has stopped.