Sterlco SPS Series Pipe Shredder - Manual (Page 47)

GRN4-610 Chapter 5: Maintenance 47 of 73
Mounting and dismounting TAPER-LOCK tensioning element
The motor- and the gear-"V"-belt pulleys are attached onto the shaft by means of a
TAPER-LOCK tensioning element. The disks must be dismounted for certain
maintenance work.
Table for the tightening torque of the screws
Tensioning element
(Type) Screws-Tightening
torque in Nm Screw details
Number Size (BSW)
3535 60 3 ½”