Sterlco SGBD Series Batch Gravimetric Blenders - Manual (Page 99)

BLN1-600A Chapter 7: Appendix 99 of 116
7-4 Addendum (Service Supervisor Information)
After all selections are made: Keep pressing the button until the unit
returns to the Recipe menu.
Passwords
• User Password “5413”
• Maintenance Password “3145348”
Maintenance password should only be supplied to qualified personnel! The
program can be compromised.
• This section of the manual should not be used by untrained personnel –
blender controller and/or program can be compromised!
• Hidden, programmable features and hidden menu pages should not be made
available to floor operators. These pages include the Service Supervisor
Information addendum located in this section. Unauthorized changes to
these factory settings by inexperienced operators may prevent the unit from
operating properly, and may void part or all of the warranty.
• Programmable features should not be accessed by inexperienced operators
or inexperienced plant personnel. Unauthorized changes may prevent the
blender from operating properly and may void part or all of the warranty.
• Call the Service Department for assistance or for further explanation of
these or any other programmable features, which may or may not be shown
in this manual.
• Information included in this manual is subject to change without notice.