Sterlco SGBD Series Batch Gravimetric Blenders - Manual (Page 14)

BLN1-600A Chapter 2: Functional Description 14 of 116
Chapter 2: Functional Description
2-1 Models Covered in This Manual
This manual provides operation, installation, and maintenance instructions for the BD, CSG,
and SGBD Series slide gate blenders of various blending rates and specifications. See below
for a list of available models.
• 150 lbs/hr Slide Gate Batch Blender with Allen-Bradley Controls
• 500 lbs/hr Slide Gate Batch Blender with Allen-Bradley Controls
• 900 lbs/hr Slide Gate Batch Blender with Allen-Bradley Controls
• 2500 lbs/hr Slide Gate Batch Blender with Allen-Bradley Controls
• 4000 lbs/hr Slide Gate Batch Blender with Allen-Bradley Controls
• 6000 lbs/hr Slide Gate Batch Blender with Allen-Bradley Controls
Model numbers are listed on the serial tag. Make sure you know the model and serial number
of your equipment before contacting the manufacturer for parts or service.
Blending systems are as varied as the applications they service. All slide gate blenders are
sized to meet the specific requirements stated by the Customer at the time of purchase.
2-2 General Description
All blenders are designed to blend plastic pellets and regrind, and supply the blended material
to the processing machine. Standard equipment is not designed to blend powder or any other
materials.
Accessories
The manufacturer offers a variety of standard options for blenders including floor stands,
RAM feeders, loading equipment, etc. All accessories are designed and manufactured to
ensure proper results for your application.
Customer Service
The intent of this manual is to familiarize the operator and maintenance personnel with these
blenders and help your organization get the maximum service from your equipment. If you
have any questions regarding installation, service, repair, custom equipment, or applications,
please do not hesitate to contact us for the information required. Prices for additional
equipment, accessories, or repair parts will be furnished promptly upon request.
• If you desire to use a blender for an application other than that for which it
was purchased, please contact your sales representative or our factory to
verify compatibility of the equipment with the new process. Misapplication
of the equipment could result in injury to the operator or damage to the
equipment.