Asus GIGATEXEL SHADER GRAPHICS CARD V7700 - Manual (Page 67)

67 ASUS V7700 Series User’s Manual
IV. Software Reference
IV
. S/W Reference
ASUS Live
ASUS Live Video
NOTES
1. ASUS Live Video can only be used with the TVR model (models with a
Video Decoder) and monitors or monitor drivers that are designed for I2C
bus control.
2. ASUS Live Video supports Windows 9x, Windows NT 4.0, and Windows
2000. For Windows NT/2000, however, the ASUS capture driver for NT/
2000 must be installed first before opening ASUS Live Video (see Install
Video for Windows Capture Driver earlier in III. Software Setup).
ASUS Live Video can be used to:
1. View images using your monitor as screen from traditional consumer devices,
such as videocassette players, camcorders, digital cameras, and laser disc players
through the onboard RCA or SVHS VIDEO-IN connectors.
2. Capture live motion video up to 30 frames/second (minimum system require-
ment: Pentium II/266).
Running ASUS Live Video
To run the utility, click Start and point to Programs and then ASUS Live and then
click ASUS Live.
You may also run ASUS Live by clicking or right-clicking the ASUS Control Panel
icon (see IV. Software Reference | ASUS Control Panel) on the taskbar’s status
area to display the ASUS Control Panel, pointing to ASUS Live Video, and then
clicking it.
Uninstalling ASUS Live Video
To uninstall the software, click Start and point to Programs and then ASUS Live
and then click Uninstall. You may also uninstall the software using the Add/Re-
move Programs Properties dialog box at the Windows Setup tab. See Windows
online help for more information on removing a Windows component.
NOTE: You should already have installed DirectX 7 or later to use ASUS Live
(see III. Software Setup | Install DirectX)