Ouellet OWC-M - Manual (Page 13)

13
Do you need help selecting the proper type of concrete-designed heating cable system for your installation?
Send us a copy of your construction plans by fax to 1 800 662-7801
or by e-mail to [email protected]. Make sure you send a copy of the
plan to scale as well as a list of all fixed elements which have to be
bypassed. At the very least, we will need a horizontal measure and a
vertical measure to validate the scale. Our technical support techni-
cians will be pleased to provide you with a list of material and a layout
sketch to guide you through your installation.
4.2 Sub-floor preparation
1. Ouellet Canada Inc. strongly recommends the installation of rigid thermal insulation panels (styrofoam-
type - 2” minimum) underneath the concrete slab, (tongue and groove or joints taped with adhesive),
with a RSI coefficient between 7.5 to 10 R to help reduce the loss of heat at the bottom level. Please refer
to the building code for recommendations pertaining to concrete sub-floors.
Note: Please refer to the building code for recommendations pertaining to concrete sub-floors.
ITEMISATION OWC
Projet/Clie nt:
Distri.:
Entrep:
No:
Note:
Date:
Tech:
Piece/Room .:
8'-11 1/4 "
6' -1 1 1/ 4"
8'-11 1/4 "
6' -1 1 1/ 4"
T
T
T
1X OWC-M0950
Utiliser/Use
1X OWC-M4000
Utiliser/Use
1X OWC-M240
0 Utiliser/Use
1X OWC-M340
0 Utiliser/Use
Image 1