beautypg.com

Maintenance, Warranty, Main technical parameters – Ouellet OVB-HL User Manual

Page 15: List of accessories

background image

7

USE

2. Replace the fascia.

3. Replace the lamps.

Ensure the lamps are screwed sufficiently to make good electrical contact. Clean the globes

and fascia.

This bathroom heater uses the infrared lamps as a source of heat. It also combines the

functions of exhausting and lighting.

1. Heating

2 lamps: Turn on/off ' ' or ' ' button.

4 lamps: Turn on/off ' ' and ' ' button.

This model is supplied with 2 groups of infrared lamps. You can turn on one or both of them

for best heating effect.

2. Exhausting

Turn on/off ' ' button.

This unit can exhaust damp and steam in a quick and efficient way by turning on the ' '

button. No additional exhaust fan is necessary for the heater itself satisfies your need in

exhausting in bathroom.

3. Lighting

Turn on/off ' ' button.

Note: Assure all buttons under 'off' condition after use. Do not turn on/off the buttons

frequently when in use. Shut off power if in a long vacancy.

1. Cleaning

1) Shut off power before servicing or cleaning.

2) Wipe globes and fascia with care by a soft cloth soaked with neutral detergent. Ensure the

globes are cool to touch before handling.

3) Remove the fascia and lamps, remove the wire cover, unwire out plug, then take out 6

screws from clapboard. Remove clapboard for clean and maintenance.

Note: Electric parts are prohibited from touching water

.

4) Install all the parts in reverse after they become dry thoroughly.

2. Lamp Replacement

1) Check and tighten globes regularly

.

MAINTENANCE

#1

#2

#2

#1

WARRANTY

2) Shut off power before replacement.

3) Use a 120V, maximum 60W type A bulb only for lighting.

4) Use our designed 120V, 270W infrared lamps.

The product is warranted against parts failure for a period of 4 years. Labor costs extra. Please

contact your local agencies for warranty services.

This warranty does not cover damage or loss caused by:

a. Light lamp.

b. Any consequential losses arising from incorrect installation or operation or maintenance of

this product.

c. Any consequential losses arising from incorrect wiring of this product.

d. Any consequential losses arising from repairing of any part of this product by unauthorized

persons.

Model

Rated Voltage

Rated Frequency

Rated Power

A716
120V
60Hz

1160W

Main Technical Parameters

1 Piece

4 Pieces

1 Piece
1 Piece

1 Set

Operation Unit

Infrared Heat Lamp

Light Lamp

User's Manual

Mounting Bracket

List of Accessories

We keep the right to revise this manual without any prior notice.