NORD Drivesystems TI043_278910340 - Manual

TI043_278910340_V1_0_GB.doc
1/2
Technical Information
CONNECTION KIT HTL ENCODER WK 4/2/4*680 OHM Part No. 278910340
Application:
Module for the connection of a HTL encoder to the TTL encoder input of a NORDAC frequency inverter.
~ suitable for all common HTL rotary encoders
~ suitable for frequency inverters with TTL encoder input from the series SK 500E and SK 700E / 750E
Technical features / Parameters / Data:
Version Series terminals
Mounting Mounting on snap-on DIN rail TS 35
Mounting width 38.5 mm
Electrical connection Screw terminals
Connection cross-section 20-10 AWG (0.5mm² - 4mm² fine-wire / - 6mm² single wire)
Screw tightening torque 0.5 Nm
Control voltage 10 … 30V DC (from frequency inverter or external voltage source)
Schematic circuit diagram, - electrical connection:
(Example of terminal designations for frequency inverter SK 520E)
FI
TTL signal terminals
HTL encoder
*according to FI version:
VO = 15 V / 24V DC
Terminal: 42 / 44