NORD Drivesystems TI 275274603 - Manual

Technical Information / Datasheet
Connection extension SK TIE4-RS232-RS485
1.0 Erstausgabe / first issue 2713 Rck TI 275274603 GB
version reason for change(s) issue name document speech
Pos : 1 /T ec hnis che Inf or mationen/ Ansc hluss er weiter ung en [HAN , H Q,SK T IE]/U ms etz er R S 232-RS485/ SK TI E4-R S485-RS232 / 275274603 / Basisinfor mationen [ SK T IE4-RS485-R S232] @ 3\ mod_1372666043302_388.doc x @ 80243 @ 5555 @ 1
SK TIE4-RS485-RS232 Part number: 275 274 603
Interface converter connection extension
Scope of delivery
1 x Module SK TIE4-RS485-RS232
1 x Connection cables RJ12  RJ12
(L = approx. 10 cm)
Field of use
Signal converter from RS 485 to RS 232. This is used to connect a device with an RS 232 interface to
another device with an RS 485 interface.
Use
The converter is intended for the following device combinations. The DIP switch must be set according
to the combination (see also "Configuration").
For SK 180E ... SK 5xxE series devices, no converter is required for communication with a PC, as the
devices are also equipped with an RS 232 interface. The converter only needs to be connected in
case one or more devices are to be connected to the PC via an RS 485 interface.
Converter
DIP switch position for "master"
RS 232 Direction of
communication
RS 485
SK 1x5E
RS 232
 √
RS 485
SK PAR-3E / -3H
SK 1x5E  √ SK CSX-3E / -3H
PC (NORD CON) √  SK 180E / SK 190E
PC (NORD CON) √  SK 2xxE
PC (NORD CON) √  SK 5xxE
Technical data
Temperature range 0 … 40 °C Interfaces RS 232 or RS 485
Protection class IP20 Connection 2 x RJ12 plug sockets
Weight 25 g Dimensions LxWxH = 56x31x24 [mm]
RS485 termination 120 Ω, fixed
Pos : 2 /T ec hnis che Inf or mationen/ Ansc hluss er weiter ung en [HAN , H Q,SK T IE]/U ms etz er R S 232-RS485/ LED Anz eigen [ SK TI E4-R S485-RS232] @ 3\ mod_1372669872055_388. doc x @ 80295 @ 5 @ 1
LED indicators
The operating statuses of the module are visualised using LED indicators.