NORD Drivesystems BU0930 User Manual
Page 7
Operation and additional information
BU 0930 GB-0612
Subject to technical amendments
7
5 Additional information
5.1 Cable gland
The connection cable for the control box must be inserted into the frequency inverter via a suitable cable
gland (not included in the scope of delivery), in order to maintain the protection class of the frequency
inverter.
5.2 Repairs
The device must be sent to the following address if it needs repairing:
NORD Electronic DRIVESYSTEMS GmbH
Tjüchkampstr. 37
26605 Aurich, Germany
For queries about repairs, please contact:
Getriebebau NORD GmbH & Co. KG
Telephone: 04532 / 401-515
Fax: 04532 / 401-555
If a frequency inverter or accessories are sent in for repair, no liability can be accepted for any added
components, e.g. such as line cables, potentiometer, external displays, etc.!
Please remove all non-original parts from the frequency inverter.
NOTE
If possible, the reason for returning the component/device should be stated. If necessary, at
least one contact for queries should be stated.
This is important in order to keep repair times as short and efficient as possible.
On request you can obtain a suitable goods return voucher from Getriebebau NORD
GmbH.