Milestone Paxton Integration Component - Manual (Page 19)

XProtect Paxton Integration Plug-in User's Guide
www.milestonesys.com Page 19 Configuration
The symbol to the left of an event indicates the presence of a mapping between this event and one or more
manual events. Click once more Show all button to expand the tree.
Note that this window will stay on top. To close the window click on the X in the upper right corner or click on the
Hide all button.
Start/Stop recording on Net2 events
The configuration required to start/stop the recording of a video stream from a specific camera based on Net2
events is a bit more complicated than the PTZ scenario above.
First, you have to define a manual event in the same way as described in “Create Manual events to be triggered
by Net2 events
”.
After the event has been created and while the event is still selected in the tree view, right-click the event and
select the Properties option to open Event Properties dialog. Click the Add button to add a Timer event beneath
the manual event. It should look like this:
Figure 17: Manual Event Properties with a Timer Event added
Adjust the timer value to the amount of time you want the recording to continue after the event has occurred. Click
the OK button to save the new event setting.
Locate the camera in the Cameras and Storage Information node:
Figure 18: The location of the Camera configuration node
Double-click it to open the Camera Properties dialog. Select the start event (e.g. “Door 1 opened”) and the stop
event (e.g. “Timer Event 2”). Hit the OK button to complete the configuration