Milestone Analytics 2.2 BOSCH VCA - Manual (Page 23)

Milestone XProtect Analytics 2.2 – BOSCH VCA; Administrator’s Manual
www.milestonesys.com Page 23 BOSCH VCA Administrator
If any errors are detected during the test, details about the error will be displayed on the
test window’s Errors tab.
Managing the BOSCH VCA Server Service
To verify the status of the Milestone BOSCH VCA Server service, look at the BOSCH VCA Server
service status indicator in the bottom right corner of the Administrator application.
Service is running: To stop the service, click the
toolbar’s Stop Server button.
Service is stopped: To start the service, click the
toolbar’s Start Server button.
Service needs restart: To restart the service, click the
toolbar’s Restart Server button.
What does “restart” mean? When you have changed certain settings through the Administrator
application, the Server service must be stopped and then started again in order for the new
settings to take effect. The restart feature lets you complete the two actions in one go.