Dwyer 265ER User Manual
Proximity div., dwyer instruments, inc, Series 265er precisor, Ii electro-pneumatic rotary positioner

The Series 265ER PRECISOR
®
II Electro-Pneumatic Positioner is used for
rotary operation of pneumatic rotary valve actuators by means of electrical
controller or control systems with an analog output signal of 4 to 20 mA or split
ranges.
FEATURES
• There is no resonance in the range of 5 to 200 Hz.
• Perform 1/2 Split Control without any other substitutes.
• Easy to adjust zero and span.
• Easy to convert from Reverse Action to Direct Action or vice versa.
• Easy Feedback Connection.
• Fast and accurate response.
• Low air consumption.
• Easy to protect from hunting effect by using output orifice in small size of
actuator.
• Designed as block build structure for maintenance and repair.
SPECIFICATIONS
Input Signal: 4 to 20 mA DC.
Input Impedance: 250 ±15 Ω.
Material: Aluminum diecasting.
Air Supply: 20 to 101 psig (1.4 to 7.0 bar).
Air Supply Connection: 1/4˝ NPT.
Gage Connection: 1/8˝ NPT.
Electrical Connection: Screw terminal.
Conduit Connection: 1/2˝ NPT female.
Linearity: ±2% of FS.
Hysteresis: 1% of FS.
Sensitivity: ±0.5% of FS.
Repeatability: ±0.5% of FS.
Air Consumption: 0.10 scfm (3 LPM) at 20 psig (1.4 bar) supply.
Flow Capacity: 28 scfm (80 LPM) at 20 psig (1.4 bar) supply.
Stroke: 0 to 90°.
Enclosure Rating: IP66.
Operating/Ambient Temperature Limits:
265ER-XX and 265-XXLS: -4 to 158°F (-20 to 70°C);
265ER-XXSS: -40 to 158°F (-40 to 70°C);
265ER-XXFM: 4 to 140°F (-20 to 60°C).
Weight: 6.2 lb (2.8 kg).
PROXIMITY DIV., DWYER INSTRUMENTS, INC.
P.O. BOX 358 • MICHIGAN CITY, INDIANA 46360 U.S.A.
Phone: 219/879-8000
www.dwyer-inst.com
Fax: 219/872-9057
e-mail: [email protected]
Series 265ER PRECISOR
®
II Electro-Pneumatic Rotary Positioner
Specifications - Installation and Operating Instructions
Bulletin F-92
STRUCTURE
SPAN UNIT
CONNECTOR
ZERO UNIT
TORQUE MOTOR
JUNCTION BOX
FEEDBACK LEVER
VENT UNIT
BASE BODY
PILOT VALVE
FEEDBACK SHAFT
CAM
INDICATOR
COVER
INTERNAL LIMIT SWITCH VERSION
STAINLESS STEEL VERSION
STANDARD VERSION
1-49/64
[45.01]
2-35/64
[64.51]
3-5/32
[80.32]
3-39/64
[91.82]
5/16
[8.00]
4-M8x1.25P
4-51/64
[122.02]
2-57/64 [73.51]
1-49/64
[45.01]
61/64
[24.30]
1-3/64
[26.51]
CONDUIT
ENTRY
2-PF (G) 1/2
2-NPT 1/2
OUT 2
PT (NPT) 1/4
10-5/16 [261.85]
6-37/64
[167.04]
7-7/8 [200.03]
6-9/16
[166.69]
8-3/4
[225.30]
2X M8X1.25
1-31/32
[50.01]
4-9/16
[115.89]
1-25/32
[45.24]
3-19/32
[91.29]
4X M8X1.25
2-3/4
[69.85]
6-43/64
[169.47]
6-9/16
[166.69]
2X M8X1.25
1-25/32
[45.24]
4-41/64
[117.87]
1-31/32
[50.01]
4X M8X1.25
3-5/8
[92.08]
2-49/64
[70.25]
Electro-Pneumatic
POSITIONER
E
le
c
tr
o
-P
n
e
u
m
a
tic
P
O
S
IT
IO
N
E
R