Ringback/Return Calls: Repeated single-ring followed by two short rings.
This type of ring is used for calls that are returning to your phone. For example, a call that you put on hold and
which is returning due to being left on hold too long.

Coverage Ring: Variable
You can also adjust the ringing used for call coverage and bridged appearance buttons. See

Coverage Ring

The options are normal ringing, an abbreviated ring (a non-repeated single ring) or no ring.

Attention Ring: Variable
The system administrator can adjust the ring used for new calls when you are already talking to a caller. The
options are an abbreviated ring (a non-repeated single ring) or no ring.

For calls alerting on a call coverage or bridged appearance button when you are already on a call, the shorter
of the coverage ring or attention ring settings is used.

The system administrator can also adjust the when ringing is used for each specific appearance button. The ringing can
be immediate, delayed for a set time or off.

18.7.1 Disabling the Ringer

This option can be used to turn off the ringer for all calls. If set to no ring, this disables both the phones

audible alerting

and

visual alerting

settings.

1. Press the Features soft key if shown.

To access the menu during a call, press the right arrow key or press the

PHONE key and then press

the Features soft key.

2. Use the

up and down

arrow keys to scroll the display to the option Call Settings.

3. Press the Select soft key or the OK button or the right arrow key.

4. Use the

up and down

arrow keys to scroll the menu to Disable Ringer.

5. Press the Change soft key to change the setting. Selecting On will turn the ringer off.

131

132

133

134

132