Overview, Introduction – Crystal GaugeCalXP User Manual
Page 3
Overview
1
GaugeCalXP Operation Manual
Overview
—
IntroductIon
Thank you for purchasing a GaugeCalXP™ Pressure Calibrator from Crystal Engineering. The GaugeCalXP is a self-contained, precision hydraulic pressure
comparator intended for the calibration of pressure gauges rated up to 700 bar or 10 000 PSI. You may fill the GaugeCalXP with your choice of water or oil.
Using this comparator for calibration is much faster than deadweight testers and most automated pressure controllers. The GaugeCalXP is so quick and easy
to use, it is ideal for calibrating those low cost gauges that are often overlooked for ISO9000 compliance.
In fact, you can calibrate most gauges, transmitters, pressure safety valves, sensors, and switches in less than ten minutes (5 to 10 test points, increasing and
decreasing pressure) using the methods described in this manual.
Spend a few minutes to read this manual and learn how you can get the most benefit from your GaugeCalXP.
Note:
We recommend using one of these three Crystal reference gauges with the GaugeCalXP.