Crystal MultiCal BAR/PSI - Manual (Page 6)

PN: 1763 Rev A, 4/2004
Page 6 of 7
PRESSURE is Our BUSINESS ™
9. In the unlikely event that you are unable to adjust the MultiCal so that all of the points
meet the tolerances of Table 2, contact Customer Service for assistance. Do not readjust
linearity. The linearity adjustment is factory set and should never require readjustment,
unless the sensor is replaced.
Table 2: Readings in mV
True Pressure Acceptable Output (mV)
1500 PSI 1498.3 to 1501.7
3000 PSI 2996.8 to 3003.2
206 PSI 205.774 to 206.226