Airlink101 AR685W - Manual (Page 50)

51
3.3 Application & Gaming
3.3.1 Virtual Server (Port Forwarding)
The Virtual Server allows you to re-direct a particular range of service port numbers (from the
Internet/WAN Ports) to a particular LAN IP address. It helps you to host some servers behind
the router NAT firewall.
Parameter Description
Enable Virtual Server Enable Virtual Server (Port Forwarding)
Private
IP This is the private IP address of the server behind the NAT
firewall. Note: You need to give your LAN PC clients a
fixed/static IP address for Virtual Server to work properly.
Computer Name
Pull down the menu and all the computers connected to the
router will be listed here. If you do not see any computer after
you click on the drop-down menu, select the option “Refresh”
and you will be given a list of computers that are connected to
your network. You can easily select the computer name without
checking the IP address of the computer.
Private Port
Input the port number of the IP address which provides Internet
service.
Type
This is the protocol type to be forwarded. You can choose to
forward “TCP” or “UDP” packets only or select “both” to forward
both “TCP” and “UDP” packets.
Public Port
Input the port number of Internet IP address which will be
redirected to the port number of local IP address defined above.
Comment
The description of this setting.
Current Virtual Server Table
From the table, you can check each Virtual Server setting.