Badger Meter GALAXY User Manual

Page 9

Text mode
Original mode

Installation & Operation Manual

3 . Tighten BAND-IT ties with one of these (listed in order of increasing tension):

a . By hand

b . BAND-IT AE201 Tensioning Hook

c . BAND-IT AE200 Tensioning Tool

d . BAND-IT C075 Bantam Tool

Figure 4: Tightening BAND-IT Ties

4 . Bend tail back over raised bridge .
5 . Secure tail under ears by slightly pushing the tail sideways and down, first one way then the other (tail may be left on

for re-use) .

NOTE:

Hammering down the bridge may increase the strength of the lock, but will not allow the clamp to be re-used .

Page 9

January 2013