Thermo Fisher Scientific Alpha COND 200 (In the process of updating the brand guideline & product image) - Manual (Page 7)

3
3 OVERVIEW
3.1 Front Panel
The front panel consists of a 4-digit LED display, 8 LED annunciators and 4 keys.
Annunciators
1. REL 1 Displayed when Relay 1 is activated
2. REL 2 Displayed when Relay 2 is activated
3. MEAS Displayed in measurement mode
4. CAL Displayed in calibration mode
5. SETUP Displayed in setup mode
6. µS Displayed when measurement range in micro-Siemens / cm
7. o C Unit of the displayed parameter (temperature)
8. mS Displayed when measurement range in milli-Siemens / cm
Keys
9. MODE Toggle between Conductivity and temperature display
10. ENTER Confirm changes or to enter into further levels of sub-menu
11. ▲( increment) Use during calibration and setup modes to increment values.
Press
▲/▼ keys together to escape to Measurement mode
11. ▼(decrement) Use during calibration and setup modes to decrease values.
Press
▲/▼ keys together to escape to Measurement mode
12. LED Display 14 segment LED display
8.8.8.8.