Thermo Fisher Scientific Eutech DO 700 - Manual (Page 6)

2
2. GETTING STARTED
2.1 Keypad Functions
Powers the meter on and off. Upon power on, the meter
automatically begins in the mode that was last used.
Calibration and memory values are retained even if meter
is unplugged.
Toggle between available measurement modes—%
saturation or concentration (mg/L or ppm). Also used to
switch to Temperature calibration during DO calibration
modes.
Press and hold for 5 seconds to enter SETUP mode.
Toggles between measurement and calibration modes.
In SETUP mode, returns user to the measurement mode.
Confirms calibration values in CAL mode.
Confirms selections in SETUP mode.
View recalled values in memory mode.
S Increase value. Scroll up in SETUP & CAL modes.
MI (Memory Insert) stores values into memory.
MR (Memory Recall) recalls values from memory.
T Decrease value. Scroll down in SETUP & CAL modes.
Freezes measured reading. Press again to resume
live reading.