Thermo Fisher Scientific Eutech DO 700 - Manual (Page 14)

10
5.2 2.0 ELE (Electrode Information)
Press to view calibration factor (CAL.F)
TIP: The factor is an indication of the probe’s efficiency. It is
the ratio of the actual mV produced by the probe to the
theoretical mV value. The ratio displays from 0.5 to 1.999.
Press to view mV output for 100% (HI).
Press to view mV output for 0% (LO).
Press to view Offset % (OFS)—% saturation mode only.
5.3 3.0 ConF (Configuration)
Press to access set-up programs 3.1 thru 3.5.
5.4 3.1 rdY (Ready Stability Indicator / Auto Hold)
Press .
Press or to choose READY “On”, READY “OFF”, or
Auto HOLd.
Press to confirm.
5.5 3.2 ºC ºF (Celsius or Fahrenheit)
Press .
Press or to select ºC or ºF.
Press to confirm.