7 print readings – Thermo Fisher Scientific CyberComm Pro for CyberScan DO 1500 User Manual

Page 24

Instruction Manual

CyberComm DO 1500

7 PRINT

READINGS

7.1

Printing using a serial printer

Connect the CyberScan DO 1500 bench meter to the serial printer via RS232C cable (refer to the list of
accessories). The configuration of the RS232C port is as shown below.

Pin Number

Description

1 -

2 Transmit

Data

3 Receive

Data

DSR (Data Send Ready)

5 GND

(Ground)

6 -

7 -

RTS (Request to Send)

9 -

7.2

Setting up the Printer

If the printer has a 25-pin connector, a 25-pin to 9-pin converter will have to be used. Use the following
configuration:

Pin of Meter

Pin Number of Printer

2 (TXD)

3 (RXD)

4 (DSR)

20 (DTR)

5 (GND)

7 (GND)

7.3

Connecting the Cable to the Computer

a) If the computer has a 9-pin connector, insert the cable (EC-CA01M09F09) provided into the socket of the

computer, taking note of the gender of the two connectors.

b) If the computer has a 25-pin connector, use a 9-pin to 25-pin, male/ female converter with 9 pins and 25

holes for connection. This converter can be obtained from any computer store.