Thermo Fisher Scientific Eutech DO 6 Plus - Manual (Page 8)

Instruction Manual DO 6+
- 2 -
2. GETTING STARTED
2.1 Description of Keypad Functions
Your meter has 6 keys on its splash-proof keypad.
Some buttons have multiple functions depending
on the mode of operation.
ON/OFF Powers meter on and off. Meter starts
up in the measurement mode that you
last switched off from.
CAL Enters into calibration mode. Pressing
while in calibration mode will abort
calibration without confirming value.
MODE Selects desired measurement mode.
When pressed simultaneously with
ON/OFF, it will take you into the SETUP mode.
For more information see Section 5 — SETUP.
HOLD Freezes measured reading. Press again to resume live reading.
ENTER Confirms calibration value in calibration mode and confirm selections
in SETUP mode.
Increment/decrement values during calibration mode or scroll through
SETUP menus. Set offset adjustments and configuration settings.