Thermo Fisher Scientific Eutech DO 6 Plus - Manual (Page 39)

Instruction Manual DO 6+
- 33 -
9. FACTORY DEFAULT SETTINGS
MENU DESCRIPTION OPTIONS DEFAULT
COF.1 Configuration Setup Menu
A.ATC Automatic Temperature Compensation YES / NO YES
b.DO DO Concentration Units mg/L or ppm mg/L
CAL.2 Calibration Data View only _ _ _ _
ELE.3 Electrode Data Menu
FACT Electrode Slope Factor View only 1.000
OFS
Viewing the % Saturation offset
adjustment.
View only 0.0%
HI.mV View mV Value at 100% Saturation View only 50 mV
LO.mV View mV Value at 0% Saturation View only 0 mV
AtO.4 Automatic Power Off YES / NO YES
rSt.5 Reset to Factory Default Menu
A.CAL Selection of Calibration Reset NO / YES NO
b.USR Selection of User Reset NO / YES NO
OFS.6 % Saturation Offset Adjustment +/- 10.0% 0.0%
DPr.7 Dissolved Oxygen Parameters Menu
A.HG Pressure Adjustment in mm Hg 500 – 1499 760
A.PA Pressure Adjustment in kPa 66.6 - 199.9 101.3
b.SAL Salinity Adjustment in ppt 0.0 - 50.0 0.0
Manual Temperature Compensation 0.0 - 50.0 °C 25.0°C