Thermo Fisher Scientific Eutech DO 6 Plus - Manual (Page 27)

Instruction Manual DO 6+
- 21 -
5.1 Configuration Menu (COF.1)
5.2 Automatic Temperature Compensation (A.ATC)
Use this menu to change automatic temperature compensation (A) or units of
concentration (mg/L or ppm). ATC is recommended for most applications.
1) From “COF.1” of either setup menu, press
HOLD/ENTER to display “A.ATC”.
2) Press HOLD/ENTER to enter the selection
menu.
3) Use ▲▼ to select YES (activate ATC) or NO
(deactivate ATC and activate manual
temperature compensation).
4) Press HOLD/ENTER to confirm.
5) Press CAL to return to measurement mode.
HOLD
ENTER
HOLD
ENTER
Selection of Automatic or
Manual Temperature
Compensation