Thermo Fisher Scientific EcoScan CON 5 & TDS 5 - Manual (Page 2)

EcoScan CON 5 / TDS 5
Table of Contents
1. INTRODUCTION 2
1.1 Introducing the EcoScan Series 2
2. GETTING STARTED 3
2.1 Description of Keypad Functions 3
2.2 Description of LCD Annunciators 3
2.3 Inserting & Removing the Rubber Boot 3
2.4 Inserting New Batteries 4
2.5 Battery Replacement 5
2.6 Connecting the Electrode and Temperature Sensor 5
2.7 Switching the Meter On 6
2.8 Setting the Conductivity-to-TDS Conversion Factor (EcoScan
TDS 5 Only)
7
3. CALIBRATION 8
3.1 Conductivity Calibration (EcoScan CON 5) 8
3.2 TDS Calibration (EcoScan TDS 5) 9
3.3 Temperature Calibration 10
3.3.1 With Temperature probe For Preselected Curve 10
3.3.2 Without Temperature probe (no ATC) 12
4. MEASUREMENT 13
4.1 Taking Measurement 13
4.2 Holding a Reading 13
4.3 Releasing a Held Reading 13
5. PROBE CARE AND MAINTENANCE 14
6. TROUBLESHOOTING 14
7. SPECIFICATIONS 15
8. ACCESSORIES 16