Techne DB-2TC User Manual
Page 29
27
AFTER USE
1. When you have finished heating samples, remember that parts of the unit – the tubes, blocks and
associated accessories – may be very hot. Take the precautions listed earlier. We recommend that the
blocks should be allowed to cool to 70°C before being removed from the heating unit. They will still
have to be handled with care.
2. If you need to remove an insert block while it is hot, screw the extractor tool into the thermometer
hole and lift the block out vertically. Never leave the extractor tool in the block while it is being used
in the Dri-Block
®
.
Removing an insert block with the extractor tool