Revo RELPTZ22-3 User Manual - Manual (Page 10)

REVO America www.revoamerica.com RELPTZ22-3
8
S1 Settings
CAMERA
ID
SWITCH NUMBER
1 2 3 4 5 6 7 8
1 ON OFF OFF OFF OFF OFF OFF OFF
2 OFF
ON
OFF OFF OFF OFF OFF OFF
3 ON ON OFF OFF OFF OFF OFF OFF
4 OFF OFF
ON
OFF OFF OFF OFF OFF
5 ON OFF ON OFF OFF OFF OFF OFF
6 OFF
ON ON
OFF OFF OFF OFF OFF
7 ON ON ON OFF OFF OFF OFF OFF
8 OFF OFF OFF
ON
OFF OFF OFF OFF
Setting Camera Protocol (Optional)
If you are using a REVO America keyboard controller or not using a keyboard controller at all, and
using the camera in the United States or other NTSC standard country, there is no need to
change the default settings of DIP switch S2 PROTOCOL (Figure 1). If you need to make
changes, see the setting options that follow.
S2 Settings
If you are using a keyboard controller or DVR other than REVO America, check the protocol
required and set switch S2-D2, D3 and D4 as follows:
S2 P ROTOCOL
D2 D3 D4
OFF OFF OFF F2, RT, Pelco-P, Pelco-D : (Default)
OFF OFF
ON
F2, RT
OFF
ON ON
Pelco-P, Pelco-D